The U0005 pyrometer is a must for those serious enamellers who wish to record all kiln temperatures when enamelling. If you use precious metals, painting enamels or any delicate technique, then simply insert the heat probe (thermocouple) into the back wall of the kiln and let the pyrometer do all the work!
The U0001 Regulator is ideal for those enamellers working over long periods or teaching enamelling in schools. The regulator removes any risk of either overfiring the enamels or damaging the kiln through the kiln temperature becoming too hot. This model may be used with any kiln within our range
The TRP010 controlling device is an automatic process controlling device with a digital display for actual and set values. A thermocouple in accordance with DIN 43 710 serves as a sensor. This is supplied with the device.
The TRP 010 controlling device is particularly suited for controlling the temperature of kilns for enamelling, melting, annealing and tempering as welll as for firing ceramics, porcelain etc. These controlling devices are used whenever temperatures are to be regulated over three phases (heating -up, full load, maintaining temperature).
The kiln is plugged into the socket of the controlling device, which switches the kiln to an output of up to 3,500 Watts at 230 Volts (resistive load).
Regulators & Pyrometer - 1
The Enamel Shop Established 1976
The TRP 008 controlling device is an automatic on and off controlling device with a digital display for actual and set values.
A NiCr-Ni thermocouple in accordance with DIN 43710 serves as a sensor. This is supplied with the device.
The TRP008 is particularly suited for controlling the temperature of kilns for enamelling, melting, annealing andtempering as well as for firing decorative motifs etc. These controlling devices are used whenever temperature is required for any period of time without preheating.
The kiln is plugged into the socket of the controlling device, which switches the kiln to an output of up to 3,500 Watts at 230 Volts (resistive load).
Digital Regulators
Other Models Available are:
TRP 009 as TRP 008 but with 7 Day Timer
TRP011 as TRP010 but with 7 Day Timer
The Enamel Shop - All Rights Reserved 2008
Technical Data
Safety Category 1
Voltage 230 V
Permitted Ambient
Temperature max 45 Degrees Celcius
Probe NiCr-Ni
Precision +/- 0.5%, +/- 1 digit
Breaking Capacity max 3500 W
Output 230 V, 50 c.p.s.
Range of control 20 - 1200 Degrees Celcius
(Maximum kiln temperature must be observed)
Dimensions
(H x W x D) 135 x 230 x 170 mm
Weight:
Controlling Device approx. 3000g
Probe approx. 270g
TRP 008
TRP 010
Technical Data
Safety Category 1
Voltage 230 V
Permitted Ambient
Temperature max 45 Degrees Celcius
Probe NiCr-Ni
Precision +/- 0.5%, +/- 1 digit
Breaking Capacity max 3500 W
Output 230 V, 50 c.p.s.
Range of control 20 - 1200 Degrees Celcius
(Maximum kiln temperature must be observed)
Dimensions
(H x W x D) 135 x 230 x 170 mm
Weight:
Controlling Device approx. 3000g
Probe approx. 270g